DTC 95

DTC SET CONDITIONS
This DTC is output if the following are detected from the analog G-sensor output.
- Analog G-sensor is not operating.
- Analog G-sensor characteristics are abnormal.
- Analog G-sensor output is abnormal.

TROUBLESHOOTING HINTS
- Malfunction of side impact sensor (for DTC 92) and side impact sensor (for DTC 95)

DIAGNOSIS
Replace side impact sensor (for DTC 92) and side impact sensor (for DTC 95).

Q: Is any of DTC 92 or 95 output?

YES: Replace the SRS-ECU.

NO: This diagnosis is complete. (If no malfunctions are not found in all steps, an intermittent malfunction is suspected. Refer to How to Use Troubleshooting/Inspection Service Points - How to Cope with Intermittent Malfunction.)