Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 2002 >> Galant LS V6-3.0L SOHC >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Restraints and Safety Systems >> Air Bag Control Module >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Bag Control Module: Testing and Inspection




SRS-ECU MEMORY CHECK

Required Special Tool:
- MB991502: Scan tool (MUT-II)

CAUTION: To prevent damage to scan tool MB991502, always turn the ignition switch to the "LOCK" (OFF) position before connecting or disconnecting scan tool MB991502.

1. Connect scan tool MB991502 to the data link connector (16-pin).
2. Read (and write down) all displayed diagnostic trouble codes.

NOTE: If the battery power supply has been disconnected or disrupted by the collision, scan tool MB991502 cannot communicate with the SRS-ECU. Check the battery then check and, if necessary, repair the front wiring harness and the body wiring harness before proceeding.




3. Read the data list (fault duration and how many times memories are erased) using scan tool MB991502.
4. Erase the diagnostic trouble codes and, after waiting 5 seconds or more, read (and write down) all displayed diagnostic trouble codes.

SRS CONTROL UNIT (SRS-ECU) INSPECTION

WARNING: If a dent, crack, deformation or rust is discovered, replace the SRS-ECU with a new one.

- Check the SRS-ECU and brackets for dents, cracks or deformation.
- Check the SRS-ECU connector for damage, and the terminals for deformation.

NOTE: Refer to Inspection of SRS-ECU for other than physical damage.
pro multis · About Operation CHARM