Service Specifications
| Brake pedal height | Standard value | 169.1 - 172.1 mm | |
| Brake pedal free play | Standard value | 3 - 8 mm | |
| Brake pedal to floor board clerarance | Standard value | 90 mm or more | |
| Proportioning valve output fluid pressure | Slip point | Standard value | 2.69 - 3.19 MPa |
| When input fluid pressure is 9.8 MPa (1,422 psi) | Standard value | 3.67 - 4.17 MPa | |
| Proportioning valve output fluid pressure difference between left and right | Limit | 0.5 MPa | |
| Disc brake pad thickness | Standard value | 10.0 mm | |
| Limit | Minimum 2.0 mm | ||
| Disc brake disc thickness | Standard value | 24.0 mm | |
| Limit | Minimum 22.4 mm | ||
| Disc brake disc run-out | Limit | 0.06 mm | |
| Front disc brake drags force | Standard value | 78 N or less | |
| Rear drum brake liing thickness | Standard value | 4.3 mm | |
| Limit | Minimum 1.0 mm | ||
| Rear drum inside diameter | Standard value | 203 mm | |
| Limit | 205 mm | ||
| Front hub end play | Limit | 0.05 mm | |
| Brake booster push rod protruding length | Standard value | 9.18 - 9.43 mm |