Service Specifications
| Brake pedal height | Standard value | 192 - 195 mm | |||
| Brake pedal play | Standard value | 3 mm or less | |||
| Brake pedal to floor board clearance when the brake pedal is depressed <Pedal depression force: Approximately 500 N (112 lbs.) | Standard value | 90 mm or more | |||
| Hydraulic brake booster (HBB) | Pump motor operating time | When brake fluid pressure is not applied to power supply system | Standard value | 20 - 80 seconds | |
| With power assist | Standard value | 2 - 11 seconds | |||
| Hydraulic pressure generated at test without booster | Depressing force 100 N | Front | Standard value | 600 kPa or more | |
| Rear | Standard value | 0 kPa | |||
| Depressing force 500 N | Front | Standard value | 4,500 kPa or more | ||
| Rear | Standard value | 0 kPa | |||
| Hydraulic pressure generated at test with booster | Depressing force 100 N | Front | Standard value | 3,000 - 4,000 kPa | |
| Rear | Standard value | 3,300 - 4,300 kPa | |||
| Depressing force 200 N | Front | Standard value | 8,000 - 10,000 kPa | ||
| Rear | Standard value | 8,000 - 10,000 kPa | |||
| Depressing force 400 N | Front | Standard value | 14,000 - 18,000 kPa | ||
| Rear | Standard value | 14,000 - 18,000 kPa | |||
| Depressing force 500 N | Front | Standard value | 15,000 - 19,000 kPa | ||
| Rear | Standard value | 15,000 - 19,000 kPa | |||
| Front disc brake | Pad thickness | Standard value | 10.0 mm | ||
| Limit | Minimum 2.0 mm | ||||
| Disc thickness | Standard value | 26.0 mm | |||
| Limit | Minimum 24.4 mm | ||||
| Disc run-out | Limit | 0.06 mm | |||
| Drag force | Standard value | 55 N | |||
| Rear disc brake | Pad thickness | Standard value | 10.0 mm | ||
| Limit | Minimum 2.0 mm | ||||
| Disc thickness | Standard value | 22.0 mm | |||
| Limit | Minimum 20.4 mm | ||||
| Disc run-out | Limit | 0.06 mm | |||
| Drag force | Standard value | 55 N | |||
| Front hub end play | Limit | 0 mm | |||
| Rear hub end play | Limit | 0 mm |