Brakes and Traction Control: Description and Operation

GENERAL DESCRIPTION
The basic brake system uses a X-type hydraulic feed arrangement. The left front and right rear brakes operate together from the same circuit, right front and left rear operate likewise. If a leak develops in the left front line or piston, the right rear brake would be affected. For safety and control, the right front and left rear circuit operates normally, providing stable braking. In this case, the left front leak must be repaired immediately as the right front left rear circuit is only provided half the braking power required for this vehicle. The main features are as follows:
^ A tandem type master cylinder is equipped in all models.
^ Tandem type 3 + 9-inch brake booster is used.
^ The following type of brakes are used.
Front:
Floating caliper, 1-piston, ventilated disc brakes
Rear:
Leading-trailing type drum brake. <2.4L Engine>
Floating caliper, 1-piston, solid disc brakes. <3.0L Engine>





CONFIGURATION DIAGRAM