Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 2004 >> Eclipse V6-3.0L SOHC >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Generator and Ignition System
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Generator and Ignition System






GENERATOR AND DRIVE BELT
REMOVAL AND INSTALLATION

REMOVAL SERVICE POINT
[[A]] CRANKSHAFT BOLT LOOSENING





1. Install special tool MD998781 to hold the flywheel or drive plate.
2. Loosen and remove the crankshaft bolt and washer.

INSTALLATION SERVICE POINT
]]A[[ CRANKSHAFT BOLT TIGHTENING





1. Install special tool MD998781 to hold the flywheel or drive plate.





2. Clean the bolt hole in crankshaft bolt and damper pulley's seating surface.
3. Degrease the cleaned seating surface of the damper pulley.
4. Install the damper pulley.
5. Apply oil to the threads of crankshaft bolt and the outer surface of washer.
6. Tighten the crankshaft bolt to the specified torque.
Tightening torque: 185 ± 5 Nm (139 ± 4 ft. lbs.)

pro multis · About Operation CHARM