Intake Manifold

ENGINE MECHANICAL
Intake manifold stay attaching bolt 30 ± 2 Nm (23 ± 2 ft. lbs.)
Intake manifold vacuum at curb idle Minimum 60 kPa (18 inch Hg)

ENGINE OVERHAUL
Throttle body bolt 19 ± 3 Nm (14 ± 2 ft. lbs.)
Throttle body stay bolt 19 ± 3 Nm (14 ± 2 ft. lbs.)
Intake manifold plenum bolt and nut 20 ± 2 Nm (14 ± 1 ft. lbs.)
Intake manifold plenum stay M8 21 ± 4 Nm (15 ± 3 ft. lbs.)
Intake manifold plenum stay M10 30 ± 3 Nm (22 ± 2 ft. lbs.)
Manifold absolute pressure sensor bolt 4.9 ±1 Nm (43 ± 9 inch lbs.)