Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 2006 >> Eclipse V6-3.8L (6G75) >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Ignition System
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition System

IGNITION SYSTEM

REMOVAL AND INSTALLATION

Removal Steps 1-6 & Required Special Tools:





REMOVAL SERVICE POINT
[[A]] CAMSHAFT POSITION SENSING CYLINDER REMOVAL





1. Using special tool MD998781, hold the drive plate.
2. Loosen the camshaft position sensing cylinder bolt.

INSTALLATION SERVICE POINT
]]A[[ CAMSHAFT POSITION SENSING CYLINDER INSTALLATION





1. Using special tool MD998781, hold the drive plate.
2. Tighten the camshaft position sensing cylinder bolt to the specified torque.
Tightening torque: 22 ± 4 Nm (16 ± 3 ft. lbs.)

]]B[[ CAMSHAFT POSITION SENSOR SUPPORT INSTALLATION





Apply a 3 mm (0.12 inch) diameter bead of sealant Mitsubishi Genuine Part number MD970389 or equivalent to the camshaft position sensor support.

pro multis · About Operation CHARM