Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 2006 >> Lancer L4-2.0L SOHC >> Repair and Diagnosis >> Brakes and Traction Control >> Disc Brake System >> Service and Repair >> Front >> Disassembly and Assembly
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Disassembly and Assembly






DISASSEMBLY AND ASSEMBLY





LUBRICATION POINTS

DISASSEMBLY SERVICE POINTS
When disassembling the disc brakes, disassemble both sides (left and right) as a set.

<> PISTON BOOT/PISTON REMOVAL





CAUTION: Blow air little by little to remove the piston. The piston will rush out if a force of air is applied suddenly.

Place a piece of wood, etc. against the caliper body as shown.
Blow compressed air through the brake hose to remove the piston boot and piston.

<> PISTON SEAL REMOVAL

CAUTION: Do not use a flat-tipped screwdriver or similar tool to remove piston seal. These may damage the inner side of the cylinder.





1. Remove the piston seal with your finger tip.
2. Clean the piston surface and inner cylinder with alcohol or brake fluid DOT 3 or DOT 4.

pro multis · About Operation CHARM