Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 2006 >> Outlander L4-2.4L SOHC >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> Timing Components >> Timing Belt
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Timing Belt

Install the timing belt tensioner adjuster to the engine and then tighten the mounting bolt to the specified torque. Do not remove the wire or pin until the tension of the valve timing belt is adjusted.
Tightening torque 23 ± 3 Nm (17 ± 2 ft. lbs.)

Engine Mechanical
Timing belt lower cover bolt (bolt, flange) M6 11 ± 1 Nm (98 ± 8 inch lbs.)
Timing belt lower cover bolt (bolt, washer assembled) M6 9.0 ± 1.0 Nm (80 ± 9 inch lbs.)
Timing belt lower cover nut 11 ± 1 Nm (98 ± 8 inch lbs.)
Timing belt upper cover bolt (bolt, flange)
M6 11 ± 1 Nm (98 ± 8 inch lbs.)
M8 14 ± 1 Nm (120 ± 13 inch lbs.)
Engine Overhaul
Timing belt cover bolt M6 (Bolt, washer assembly) 9.0 ± 1.0 Nm (80 ± 8 inch lbs.)
Timing belt cover bolt M6 (Flange bolt and nut) 11 ± 1 Nm (98 ± 8 inch lbs.)
Timing belt cover bolt M8 14 ± 1 Nm (124 ± 8 inch lbs.)
pro multis · About Operation CHARM