Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 2007 >> Eclipse L4-2.4L (4G69) >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Generator and Ignition System
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Generator and Ignition System

GENERATOR AND IGNITION SYSTEM

REMOVAL AND INSTALLATION

Removal Steps 1-17:





Required Special Tools:
* MB991398: Spark Plug Wrench
* MD998781: Flywheel Stopper

REMOVAL SERVICE POINT

[[A]] SPARK PLUG REMOVAL





Using special tool MB991398, remove the spark plug.

[[B]] CAMSHAFT POSITION SENSING CYLINDER REMOVAL





1. Using special tool MD998781, hold the drive plate.
2. Remove the camshaft position sensing cylinder.

INSTALLATION SERVICE POINT

]]A[[ CAMSHAFT POSITION SENSING CYLINDER INSTALLATION





1. Using special tool MD998781, hold the drive plate.
2. Tighten the camshaft position sensing cylinder to the specified torque.
Tightening torque: 22 ±4 Nm (17 ±2 ft-lb)

]]B[[ CAMSHAFT POSITION SENSOR SUPPORT INSTALLATION





Apply a 3 mm (0.12 inch) bead of sealant (MITSUBISHI Genuine Part number MD970389) in the groove as shown.

]]C[[ SPARK PLUG INSTALLATION





Using special tool MB991398, tighten the spark plug to the specified torque.
Tightening torque: 25 ±5 Nm (19 ±2 ft-lb)

pro multis · About Operation CHARM