Brake Rotor/Disc

The content of this article reflects changes in TSB 10-35-001.


NOTE: Thickness variation (at least 8 positions) should not be more than 0.015 mm (0.0006 inch).

Disc brake disc thickness mm (in)
Front
Standard Value 26.0 (1.02)
Limit Minimum 24.4 (0.96)
Rear-2.4L
Standard Value 10.0 (0.39)
Limit Minimum 8.4 (0.33)
Rear-3.8L
Standard Value 20.0 (0.79)
Limit Minimum 18.4 (0.72)
Disc brake disc run-out mm (in)
Front 0.1 (0.0039)
Rear 0.04 (0.0016)
Disc brake drag force N (lb)
Front 64 (14) or less
Rear 54 (12) or less