Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 2007 >> Eclipse L4-2.4L (4G69) >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Service and Repair >> Overhaul >> Overhaul (Subassemblies) >> Transmission Case
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Case

TRANSMISSION CASE

DISASSEMBLY AND ASSEMBLY

Disassembly Steps 1-6:




Required Special Tool:





ASSEMBLY SERVICE POINTS
>>A<< BUSHING INSTALLATION





1. Press fit the bushing so the seam is away from the air vent.





2. Be sure the bushing is fully seated as shown. It must be 3 mm (0.12 inch) below the housing surface.

>>B<< NEEDLE BEARING INSTALLATION





1. Check the installation direction of the needle bearing.
2. Press fit the needle bearing until it is flush with the case.

>>C<< OIL SEAL INSTALLATION





1. Apply gear oil (Hypoid gear oil SAE 75W-90 or 75W-85W conforming to API classification GL-4).





2. Using special tool MD998325, press fit the oil seal into the transaxle case.



pro multis · About Operation CHARM