Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 2007 >> Eclipse V6-3.8L (6G75) >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Engine Oil Control Valve
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Engine Oil Control Valve

ENGINE OIL CONTROL VALVE

REMOVAL AND INSTALLATION

Removal Steps 1-25:





Required Special Tool:
* MD998713: Camshaft Oil Seal Installer

INSTALLATION SERVICE POINTS

]]A[[ ENGINE OIL PRESSURE SWITCH INSTALLATION





Apply sealant (3M(TM) AAD Part number 8672 or equivalent) to the threads of the engine oil pressure switch.

]]B[[ ENGINE OIL CONTROL VALVE INSTALLATION





CAUTION:
^ Never re-use the O-ring.
^ Before installing O-ring, wind sealing tape around the oil passages cut-out area of engine oil control valve, to prevent damage. If the O-ring is damaged, it can cause an oil leak.

1. Apply a small amount of engine oil to the O-ring and then install it to the engine oil control valve.
2. Install the engine oil control valve to the cylinder head.
3. Tighten the engine oil control valve.
Tightening torque: 11 ±1 Nm (98 ±8 in-lb)

]]C[[ OIL SEAL INSTALLATION





1. Apply engine oil to the lip area of the oil seal and the front end outside diameter of camshaft.
2. Using special tool MD998713, install the camshaft oil seal.
pro multis · About Operation CHARM