Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 2007 >> Eclipse V6-3.8L (6G75) >> Repair and Diagnosis >> Starting and Charging >> Charging System >> Alternator >> Service and Repair >> Removal and Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Replacement

GENERATOR ASSEMBLY

Pre-Removal & Post-Installation Operation:




Removal Steps 1-7:




REMOVAL AND INSTALLATION <3.8L ENGINE>

REMOVAL SERVICE POINTS

<> A/C COMPRESSOR AND CLUTCH ASSEMBLY REMOVAL
1. With the hose installed, remove the A/C compressor and clutch assembly from the bracket.
2. After removing the A/C compressor and clutch assembly, secure it with a cord in a location where it does not interfere with generator assembly removal.

<> GENERATOR ASSEMBLY REMOVAL
Move the A/C compressor assembly to one side, and then remove the generator assembly from under the vehicle.

INSTALLATION SERVICE POINT




>>A<< GENERATOR ASSEMBLY INSTALLATION
1. Install the generator assembly to the generator bracket.
2. Tighten the generator assembly mounting bolts by hand.
3. Tighten the generator assembly mounting bolts to the specified torque in the order shown.

Tightening torque: 49 ± 9 N.m (36 ± 7 ft-lb)
pro multis · About Operation CHARM