Transfer Oil
TRANSFER OILTRANSFER OIL LEVEL CHECK
1. Remove the filler plug.
2. Check that the oil level is up to the lower edge of the filler plug hole.
3. Check that the oil is not noticeably dirty.
4. Tighten the filler plug to the specified torque.
Tightening torque: 32 ± 2 N-m (23 ± 2 ft-lb)
TRANSFER OIL CHANGE
1. Remove the drain plug and discharge the oil.
2. Tighten the drain plug to the specified torque.
Tightening torque: 32 ± 2 N-m (23 ± 2 ft-lb)
CAUTION: Cover the heat protector of the front exhaust pipe with cardboard or something similar when refilling transfer oil so that transfer oil does not enter the area between the front exhaust pipe and heat protector.
3. Fill oil to the bottom of the filler plug hole.
Specified oil: Hypoid gear oil API classification GL-5 SAE 90
Quantity: 0.55 dm3 (0.58 quarts)
4. Tighten the filler plug to the specified torque.
Tightening torque: 32 ± 2 N-m (23 ± 2 ft-lb)