Shift Lock Mechanism Check

SHIFT LOCK MECHANISM CHECK

Inspection Procedure 1:

Inspection Procedure 2-6:

COMPONENT PARTS CHECK

SHIFT LOCK LINK





Check each part for damage and disengagement.
Check that the lock lever smoothly moves in the direction of arrow B in the figure when the shift lock solenoid plunger is pressed in the direction of arrow A, and smoothly moves back to the original position when the plunger is released.

ELECTRICAL CIRCUIT





Check for the following operations.
^ With the selector lever in "P" position, apply voltage (equivalent to the battery voltage) between the selector lever assembly connector terminals No. 3 and No. 6, and between terminals No. 4 and No. 6. Check that the shift lock solenoid operates normally while the voltage is applied, and moves back to the original position when the voltage is removed.
^ With the selector lever moved to the position other than "P", apply voltage (equivalent to the battery voltage) between the selector lever assembly connector terminals No. 3 and No. 6, and between terminals No. 4 and No. 6. Check that the shift lock solenoid does not operate at this time.