System Specifications

Cylinder head bolt 45 ± 2 Nm (33 ± 1 ft-lb) +150°
(in two or three cycles)





Cylinder head flatness of gasket surface mm (in)
Standard value Less than 0.03 (0.0012)
Limit 0.05 (0.002)

Intake manifold
1.Tighten the nuts on the right bank 7.0 ± 1.0 Nm (62 ± 8 in-lb)
2.Tighten the nuts on the left bank 22 ± 1 Nm (16 ± 1 ft-lb)
3.Tighten the nuts on the right bank 22 ± 1 Nm (16 ± 1 ft-lb)
4.Tighten the nuts on the left bank and those on the right bank again in that order.
Tightening torque 22 ± 1 Nm (16 ± 1 ft-lb)





Camshaft sprocket bolt 90 ± 10 Nm (65 ± 7 ft-lb)

Exhaust manifold nut 49 ± 5 Nm (36 ± 3 ft-lb)