Outside Rear View Mirror

DOOR MIRROR

REMOVAL AND INSTALLATION

Removal Steps 1-4:

REMOVAL SERVICE POINT

]]A[[ DOOR MIRROR OUTER COVER REMOVAL

CAUTION: The claws of the mirror are prone to break when working in cold temperatures. Always use a hair drier or the like to warm up the mirror claws and its periphery to 20 °C or higher prior to works. When the mirror is heated too quickly from its cold state, it may be broken.






1. Slant the mirror upward with your hands. Then insert a flat-tipped screwdriver wrapped with protective tape between the pivot plate and mirror through the cut-out from behind the mirror. Now pry off the mirror claws and release the lower side of the mirror as shown in the illustration.
2. Release the upper side of the mirror from the tabs while pulling out the mirror downwards.






3. Remove the door mirror outer cover by disengaging the claws in the numerical order of the illustration from the mirror body side.

INSTALLATION SERVICE POINT

[[A]] DOOR MIRROR OUTER COVER INSTALLATION

CAUTION: Tap the claw positions securely to confirm that they are engaged securely.






Install the door mirror outer cover by engaging the claws in the numerical order of the illustration.