For Transfer Mechanism

REAR AXLE OIL (FOR TORQUE TRANSFER MECHANISM PART) (CHANGE)





1. Remove the filler plug.
2. Remove the drain plug and drain oil.
3. Install the drain plug, and tighten it to the specified torque.

Tightening torque: 32 ± 2 Nm (23 ± 2 ft-lb)

4. Fill the specified gear oil up to the bottom of the filler plug hole.

Specified gear oil: DIAMOND ATF-SP III
Amount to use: 0.55 - 0.60 dm3 (0.58 - 0.63 qt)

5. Install the filler plug, and tighten it to the specified torque.

Tightening torque: 49 ± 10 Nm (37 ± 7 ft-lb)