Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal and Replacement

KNOCK SENSOR

REMOVAL AND INSTALLATION

CAUTION
When the knock sensor is replaced, initialize the learned value using scan tool.

Pre-removal & Post-installation Operation:

Removal Steps 1-2:

INSTALLATION SERVICE POINT

]A[ KNOCK SENSOR INSTALLATION

Set the connector of the knock sensor to the position shown in the figure, and tighten it to the specified torque.

Tightening torque: 20 ± 2 Nm (15 ± 1 ft-lb)