Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 2008 >> Raider 4WD V6-3.7L >> Repair and Diagnosis >> Body and Frame >> Seats >> Seat Temperature Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Temperature Control Module: Service and Repair

SWITCH/MODULE - HEATED SEAT

REMOVAL







1. Disconnect and isolate the battery negative cable.
2. Using an appropriate flat bladed tool, remove the heated seat switch/modules from the console by gently prying up from the top edge of the switch/module bezel. Take care not to scratch or damage the console or bezel in any way.







3. Disconnect the switch/module electrical connectors (2) and (4).
4. Using an appropriate flat bladed tool, remove the heated seat switch/module (3) from the bezel (1).

INSTALLATION







1. Align the tabs of the switch/module to the bezel and gently push together until the tabs are securely in place.







2. Connect the switch/module electrical connectors (2) and (4).
3. Gently push the heated seat switch/module bezel into the mounting hole in the center console until it is securely in place.
4. Connect the battery negative cable.
5. Verify heated seat system operation.
pro multis · About Operation CHARM