Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 2008 >> Raider 4WD V6-3.7L >> Repair and Diagnosis >> Brakes and Traction Control >> Drum Brake System >> Backing Plate >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Backing Plate: Service and Repair

SUPPORT PLATE

REMOVAL





1. Remove wheel and tire assembly and brake drum.
2. Remove the parking brake cable (2) from the parking brake lever (1) in the rear of the support plate.





3. Disconnect the brake line (4) at the wheel cylinder (2).
4. Remove the wheel cylinder (2) from the support plate (1). 5. Remove the axle shaft.





6. Remove the nuts (1) attaching the support plate (2) to the axle and remove the support plate (2).

INSTALLATION





1. Install support plate (2) on axle flange. Tighten attaching nuts (1) to 68 Nm (55 ft. lbs.).





2. Install wheel cylinder (2).
3. Install brake line (4) in wheel cylinder (2).





4. Reassemble the brake shoe assembly and insert the lever (1) into the support plate.
5. Install the park brake cable (2) to the lever (1).
6. Install axle shaft.
7. Adjust brake shoes to drum with brake gauge.
8. Install brake drum and wheel and tire assembly.
9. Bleed brake system.
pro multis · About Operation CHARM