Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 2008 >> Raider 4WD V6-3.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Block Assembly >> Specifications
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cylinder Block Assembly: Specifications

CYLINDER BLOCK





PISTONS





PISTON RINGS





CONNECTING RODS





Lubricate NEW rod bolts and bearing surfaces with engine oil. Install connecting rod cap and bearing. Tighten the NEW bolts to 27 Nm (20 ft. lbs.) plus 90°.

CRANKSHAFT








Install the bedplate retaining bolts, making sure to place the stud bolts in the correct location, Torque the bolts in the sequence shown.
^ Hand tighten bolts 1D, 1G and 1F until the bed-plate contacts the block.
^ Tighten bolts 1A-1 54 Nm (40 ft. lbs.)
^ Tighten bolts 1-8 7 Nm (62 in. lbs.)
^ Turn bolts 1-8 an additional 90°
^ Tighten bolts A-E 27 Nm (20 ft. lbs.)

Crankshaft Damper Bolt 175 Nm (130 ft. lbs.)
pro multis · About Operation CHARM