Head Rest: Service and Repair
HEADREST - EXTENDED CABREMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the cab back trim panel
3. Remove the fasteners (3) securing the lower headrest to the cab back.
4. Lower the headrest (2) to disengage the upper post from the grommet (1).
5. Remove the headrest from the vehicle.
INSTALLATION
1. Position the headrest (2) into the vehicle.
2. Insert the upper post into the grommet (1) and push up slightly on the headrest (2).
3. Install the fasteners (3) to secure the lower headrest to the cab back.
4. Tighten the fasteners to 12 N.m (9 ft.lbs.).
5. Install the cab back trim panel
6. Connect the battery negative cable.