Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 2008 >> Raider 4WD V6-3.7L >> Repair and Diagnosis >> Steering and Suspension >> Suspension >> Control Arm >> Control Arm Bushing >> Service and Repair >> Lower Control Arm Shock Bushing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Lower Control Arm Shock Bushing

LOWER CONTROL ARM SHOCK BUSHING

REMOVAL





1. Remove the shock.

NOTE: Extreme pressure lubrication must be used on the threaded portions of the tool. This will increase the longevity of the tool and insure proper operation during the removal and installation process.

2. Install special tools to press the bushing (3) out of the lower control arm (4) using special tools C-4212-F (Press) (1), 9653-1 (driver) (4) and 9653-2 (Receiver) (5).

INSTALLATION





NOTE: Extreme pressure lubrication must be used on the threaded portions of the tool. This will increase the longevity of the tool and insure proper operation during the removal and installation process.

1. Install the new shock bushing (4) into the lower control arm (3) using tools C-4212-F (Press) (1), 9653-3 (driver) (5), 9602 (Depth gauge) (2) the depth gauge will automatically set the depth of the bushing (4) in the control arm (3).
2. Install the shock.
pro multis · About Operation CHARM