Shift Boot: Service and Repair
SHIFT BOOT - FLOORREMOVAL
1. Using a small flat-bladed tool, remove the insert (1) from the top of the gear shift knob (2).
2. Remove the nut (3) that secures the gear shift knob to the gear shift lever (4).
3. Remove the gear shift knob.
4. Using a trim stick C-4755 or equivalent, disengage the retaining tabs that secure the gear shift boot (5) to the floor console (6) and remove the boot.
INSTALLATION
1. Position the gear shift boot (5) over the gear shift lever (4).
2. Engage the retaining tabs that secure the gear shift boot to the floor console (6).
3. Install the gear shift knob (2) onto the gear shift lever.
4. Install the nut (3) that secures the gear shift knob to the gear shift lever. Tighten the nut to 27 N.m (20 ft.lbs.).
5. Install the insert (1) into the top of the gear shift knob.