Operation CHARM: Car repair manuals for everyone.
Home >> Mitsubishi >> 2008 >> Raider 4WD V6-3.7L >> Repair and Diagnosis >> Wiper and Washer Systems >> Check Valve >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Check Valve: Service and Repair

REMOVAL






1. Remove both wiper arms from the wiper pivots.
2. Unlatch and open the hood.
3. Remove the cowl plenum cover/grille panel from over the cowl plenum.
4. From the underside of the cowl plenum cover/grille panel (4), disconnect the cowl plenum (1) and washer nozzle (3) hoses from the three barbed nipples of the check valve (2).
5. Remove the check valve from the underside of the cowl plenum cover/grille panel.

INSTALLATION






1. Position the check valve (2) to the underside of the cowl plenum cover/grille panel (4). Be certain that the flow direction arrow molded into the check valve body is oriented towards the washer nozzles.
2. From the underside of the cowl plenum cover/grille panel, reconnect the cowl plenum (1) and washer nozzle (3) hoses to the three barbed nipples of the check valve.
3. Reinstall the cowl plenum cover/grille panel over the cowl plenum.
4. Close and latch the hood.
5. Reinstall both wiper arms onto the wiper pivots.
pro multis · About Operation CHARM