How to Initialize Continuously Variable Transaxle (CVT) Learned Value

HOW TO INITIALIZE CVT LEARNED VALUE

AIM
After the CVT assembly, engine assembly, and valve body assembly are replaced, their learned value must be initialized. The initialization procedure is as below.

INITIALIZATION PROCEDURE
1. Move the selector lever to the "P" range and turn the ignition switch to the "LOCK" (OFF) position. Then, connect scan tool to the data link connector.
2. Turn the ignition switch to the "ON" position, and then move the selector lever to the "R" range.
3. Depress the accelerator pedal while depressing the brake pedal. (Engine stops.) Perform the operation to erase the DTC under this condition (even if no code is set).

NOTE: Performing initialization of the learned value will also erase the diagnostic trouble code.