Alignment: Specifications

Front

TOE-IN
Standard value: 1 ± 2 mm (0.04 ± 0.08 inch)

CAMBER, CASTER AND KINGPIN INCLINATION
Standard value:
Camber - 0 degrees 05' ± 0 degrees 30' (Left/right deviation within 0 degrees 30')
Caster 2 degrees 40' ± 0 degrees 30' (Left/right deviation within 0 degrees 30')
Kingpin inclination 13 degrees 30' ± 1 degrees 30'

NOTE: Camber and caster are preset at the factory and cannot be adjusted

Rear

TOE-IN
Standard value: 3 ± 2 mm (0.12 ± 0.08 inch)

CAMBER
Standard value: -0 degrees 55' ± 0 degrees 30' (Left/right difference 0 degrees 30' max)

The camber is pre-adjusted at factory and is not adjustable