Low Tire Pressure Indicator: Testing and Inspection

TPMS WARNING LIGHT CHECK





1. Check that the TPMS warning light illuminates for approximately three seconds when the ignition switch is turned to the "ON" position. (If it does not illuminate, perform troubleshooting for TPMS Inspection Procedure No.3. Refer to Inspection Procedure 3).
2. Check that it illuminates for approximately three seconds and then goes out (If the warning light does not turn off and stays on, perform troubleshooting for TPMS Inspection Procedure No.1. Refer to Inspection Procedure 1) (If the warning light does not turn off and flashes, perform troubleshooting for TPMS Inspection Procedure No.2. Refer to Inspection Procedure 2).
NOTE:
*: Flash for about 1 minute and then remain illuminated.