Overhaul

DISASSEMBLY AND ASSEMBLY









DISASSEMBLY SERVICE POINT

[[A]] RIVETS REMOVAL





Use a drill [(dia. 4.0 mm(0.16 in)] to make a hole in the rivet to break it, and remove the rivet.

ASSEMBLY SERVICE POINT

]]A[[ RIVETS INSTALLATION





Use a rivet tool to connect the parts with rivets by the following procedures.
1. Insert the rivet into a corresponding location.
2. Set the rivet tool at a section A of rivet.
3. While pushing the flange surface of the rivet onto parts to be fixed with the rivet tool, press the handle of the tool.
4. Thin part of section A of the rivet will be cut off and the parts is fixed in position.