System Specifications

Cylinder Head Bolts





Install new bolts
First step 45 ± 2 Nm (33 ± 1 ft-lb) in two or three cycles
Second step Tighten 150° to 154°

Cylinder Head Inspection

The grinding limit must be within 0.15 mm including the cylinder block





Standard value 0.03 mm (0.0012 inch)
Limit 0.05 mm (0.002 inch)
Cylinder head height (specification when new) 120 mm (4.7 inches)
Grinding limit 0.15 mm (0.006 inch)

Intake Manifold Fasteners Tightening Specifications

Exhaust Manifold Fasteners Tightening Specifications

Camshaft Sprocket Bolts Specifications