Inspection Procedure 5

Inspection Procedure 5: Sunshade anti-trap function does not work.

CAUTION:
Before replacing the ECU, ensure that the power supply circuit, the ground circuit and the communication circuit are normal.

COMMENT ON TROUBLE SYMPTOM

Malfunction of the sunshade motor assembly or incorrect learning of the sunshade fully closed position is suspected.

PROBABLE CAUSES

- Malfunction of the sunshade motor assembly
- Incorrect learning of the sunshade fully closed position

DIAGNOSIS

STEP 1. Check the trouble symptom.

Check the sunshade lid trouble symptom according to the following procedures.
1. Carry out the learning procedures of the sunshade fully closed position (Refer to Programming and Relearning).
2. Check the trouble symptom.

Q. Is the check result normal?

YES Intermittent malfunction How to Cope With Intermittent Malfunctions.)
NO Replace the sunshade motor assembly.