Door Mirror Glass

DOOR MIRROR


Door Mirror Glass


REMOVAL AND INSTALLATION

Removal
1. Set mirror assembly mirror glass upward.
2. Apply tape to protect mirror housing.





3. Insert a screwdriver as shown and remove mirror glass by pushing up two hooks.
4. Disconnect electrical connectors from mirror holder.
5. If necessary, remove screws and remove mirror actuators.

INSTALLATION
1. If necessary, install mirror actuators.





2. Set mirror holder bracket (1) and mirror glass (2) in the horizontal position.
3. Connect electrical connectors to the back of the mirror holder.
4. Heat lower hooks with a heat gun to prevent breaking the hooks.
5. Align upper hooks to bracket.
6. Align lower hooks to bracket and push lower part of mirror glass (2) down into holder bracket (1) until you hear a click. Ensure that mirror glass is secure in door mirror assembly.