Inspection With CONSULT-III (Self-Diagnosis)

IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)


Inspection with CONSULT-III (Self-Diagnosis)

1.SELF-DIAGNOSIS RESULT CHECK
1. Connect CONSULT-III and select "IPDM E/R" on the "SELECT SYSTEM" screen.
2. Select "SELF-DIAG RESULTS" on the "SELECT DIAG MODE" screen.
3. Check display content in self-diagnosis results.






NOTE:
The Details for Display for the Period are as follows:
- CRNT: Error currently detected by IPDM E/R.
- PAST: Error detected in the past and stored in IPDM E/R memory.
Contents displayed
NO DTC DETECTED. FURTHER TESTING MAY BE REQUIRED.-INSPECTION END.
CAN COMM CIRC-Print out the self-diagnosis result and refer to CAN Communication System.