Precaution For A/T Assembly Or TCM Replacement

PRECAUTIONS


Precaution for A/T Assembly or TCM Replacement

- When replacing A/T assembly or TCM, refer to the pattern table below and initialize TCM if necessary.

TCM INITIALIZATION PATTERNS






NOTE:
"Old one" is the TCM or A/T assembly that has been used on other vehicles.

METHOD FOR TCM INITIALIZATION
1. Set the vehicle following the items listed below.
- Ignition switch "ON".
- Selector lever "P" or "N" position.
- Engine not running.
- Vehicle speed is 0 km/h (0 MPH).
- Ignition voltage is more than 10.5V.
- Malfunction was not detected.
2. Touch "WORK SUPPORT".
3. Touch "INITIALIZATION".
4. Initialize TCM following the direction in display.