Preliminary Check

INSPECTION AND ADJUSTMENT

Preliminary Check


1. FOREIGN OBJECTS

Check the following:
- objects on or behind the pedals that could cause binding
Are there any foreign objects that could be causing interference with the pedals?
YES- Remove objects.
NO- GO TO 2

2. WIRING CONNECTIONS

1.Disconnect pedal adjusting motor.
2.Check terminals for damage or loose connections.
3.Reconnect harness connectors.
Are any connectors damaged or loose?
YES- Repair or replace damaged parts.
NO- GO TO 3

3. POWER AND GROUND

Check power supply and ground circuits for pedal adjusting switch. Pedal Adjusting Switch Power Supply And Ground Circuit Inspection.
Is the inspection result normal?
YES- Symptom Related Diagnostic Procedures.
NO- Repair or replace as necessary.