Sensor Reference Graphs In Data Monitor Mode

The following are the major sensor reference graphs in "DATA MONITOR" mode. (Select "HI SPEED" in "DATA MONITOR" with CONSULT)

Major Sensor Reference Graph:

THRTL POS SEN, ABSOL TH-P/S, CLSD THL/P SW
Shown is the data for "THRTL POS SEN", "ABSOL TH-P/S" and "CLSD THL/P SW" when depressing the accelerator pedal with the ignition switch "ON".
The signal of "THRTL POS SEN" and "ABSOL TH-P/S" should rise gradually without any intermittent drop or rise after "CLSD THL/P SW" is changed from "ON" to "OFF".

Major Sensor Reference Graph:

CMPS-RPM (POS), MAS AIR/FL SE, THRTL POS SEN, RR 02 SEN-B1, FR O2 SEN-B1, INJ PULSE-B1
Shown is the data for "CMPS-RPM (POS)", "MAS AIR/FL SE", "THRTL POS SEN", "RR O2 SEN-B1", "FR O2 SEN-B1" and "INJ PULSE-B1" when revving quickly up to 4,800 rpm under no load after warming up engine sufficiently.
Each value is for reference, the exact value may vary.

THRTL POS SEN:

"THRTL POS SEN" should increase while depressing the accelerator pedal and should decrease while releasing it.

RH O2 SEN-B:

"RR O2 SEN-B1" may increase immediately after depressing the accelerator pedal and may decrease after releasing the pedal.

FR O2 SEN-B1:

"FR O2 SEN-B1" may increase immediately after depressing the accelerator pedal and may decrease after releasing the pedal.

INJ PULSE-B1:

"INJ PULSE-B1" should increase when depressing the accelerator pedal and should decrease when the pedal is released.