Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Spark Plug: Service and Repair

REMOVAL




1. Disconnect ignition wires from spark plugs at boot. Do not pull on the wire.




2. Remove spark plugs with suitable spark plug wrench.







NOTE: Spark plug wrench set is available in tool kit provided on vehicle. A type is for spark plugs except for No. 6 cylinder. B type is for No. 6 cylinder.

3. Check type and gap of new spark plug.

Gap: 1.0 - 1.1 mm (0.039 - 0.043 in)

INSTALLATION




When installing spark plugs to No. 2 and 4 cylinders, securely fit each ignition wire mounting hole onto the ignition wire fixing pin.

Spark plug: 20 - 29 Nm (2.0 - 3.0 kg-m, 14 - 22 ft-lb)