Multi-Remote Control System

SYMPTOM CHART






NOTE: Always check remote controller battery before replacing remote controller

NOTE: When performing a door locking operation using either the main power window and door lock/unlock switch, the door lock/unlock switch RH, the front door LH lock knob or a multi-remote controller, all the doors will lock and then the front door LH will immediately unlock if
- the key switch is in INSERTED position (key is in ignition key cylinder) and
- ignition switch is in the OFF position and
- either front door switch LH or RH is in OPEN position (door is open).

Step 1:

REMOTE CONTROLLER BATTERY CHECK

Steps 1 - 2:

Step 3:

POWER SUPPLY AND GROUND CIRCUIT CHECK

Steps 1 - 2:

DOOR SWITCH CHECK

Steps 1 - 2:

Step 3:

KEY SWITCH (INSERTED) CHECK

Steps 1 - 3:

HAZARD REMINDER CHECK

Step 1:

Steps 2 - 3:

INTERIOR ROOM LAMP OPERATION CHECK