Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2003 >> Murano AWD V6-3.5L (VQ35) >> Repair and Diagnosis >> Windows and Glass >> Windows >> Testing and Inspection >> Programming and Relearning
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Programming and Relearning

SETTING AFTER INSTALLATION

Resetting of limit switch
If any of the following work has been done, reset the limit switch (integrated in the motor).
- Removal and installation of the regulator.
- Removal and installation of the motor from the regulator.
- Operate the regulators as a unit.
- Removal and installation of the glass.
- Removal and installation of the glass run.

Resetting
After installing each component to the vehicle, follow the steps below.
1. Remove the motor from regulator.
2. Connect the connector. Rotate the motor unit with power window switch for more than 5 sec in glass raising direction.
3. Install motor to regulator.
4. Raise glass to the top position.

CAUTION: Do not use Auto switch to raise the glass to the top position.



pro multis · About Operation CHARM