Information

Before beginning this Service Procedure, use CONSULT-II to make sure there are no DTCs stored in the ECM.

Repairs for stored DTCs must be done before performing the ECM reprogramming. Use ASIST for DTC diagnostic and repair information.

Repairs for stored DTCs are not covered by this campaign.

Check the Current ECM Part Number (P/N)

1. With the Diagnostic Card (red/white card) in CONSULT-II and CONSULT-II turned "ON", print the ECM Part Number as follows:

[START(Nissan)] >> [ENGINE] >> [ECM PART NUMBER] >> [COPY]

2. Attach this printout to the Repair Order.





^ Figure A is an example of the ECM Part Number printout.

3. Using the ECM P/N printout:





^ Compare your vehicle's ECM P/N to those shown in Chart A, above.

A. If your vehicle's ECM P/N matches one of the Current ECM P/N's in the chart above and Service Comm indicates campaign R0803 is outstanding:

^ Go to Reprogramming the ECM.

B. If your vehicle's ECM P/N matches one of the New ECM P/N's in the chart above:

^ No further action is needed - submit a claim using Op-Code R08032.

C. If your vehicle's ECM P/N does not match any of the ECM P/N's in the chart above:

^ Recheck Service Comm (campaign ID R0803) to confirm the vehicle you're working on is affected by this campaign.