Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2004 >> Titan 4WD V8-5.6L (VK56) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Transmission and Drivetrain >> Relays and Modules - Transfer Case >> Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Module: Service and Repair

TRANSFER CONTROL UNIT
REMOVAL
1. Switch 4WD shift switch to 2WD and set transfer assembly to 2WD.
2. Remove the glove box assembly.
3. Disconnect transfer control unit connectors.





4. Remove the transfer control unit.

INSTALLATION
Note the following, and install in the reverse order of removal.
^ When installing the transfer control unit, tighten bolts to the specified torque.
Transfer control unit bolts : 51 Nm (0.52 kgf-cm, 45 inch lbs.)
^ After the installation, check 4WD shift indicator pattern. If NG, adjust position between transfer assembly and transfer control unit.

pro multis · About Operation CHARM