Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2005 >> Altima L4-2.5L (QR25DE) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Brakes and Traction Control >> Electronic Brake Control Module >> Service and Repair >> ABS
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

ABS

ACTUATOR AND ELECTRIC UNIT (ASSEMBLY)





Removal and Installation

REMOVAL
1. Disconnect negative battery cable.
2. Remove windshield wiper motor and linkage assembly.
3. Drain brake fluid. Refer to "Changing Brake Fluid".
4. Disconnect harness connectors from ABS actuator and electric unit (control unit).
5. Disconnect brake pipes.
6. Remove nuts and bolts for ABS actuator and electric unit (control unit) and remove from vehicle.

INSTALLATION

CAUTION: After installation of ABS actuator and electric unit (control unit), refill brake fluid. Then bleed air from system. Refer to "Bleeding Brake System".

1. Position ABS actuator and electric unit (control unit) in vehicle.
2. Install and tighten ABS actuator and electric unit (control unit) nuts and bolts.
3. Install brake pipes to ABS actuator and electric unit (control unit), then tighten flare nuts.
4. Connect ABS actuator and electric unit (control unit) harness connectors.
5. Install windshield wiper motor and linkage assembly. Refer to "INSTALLATION".
6. Reconnect battery cable.
pro multis · About Operation CHARM