Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2005 >> Armada 4WD V8-5.6L (VK56) >> Repair and Diagnosis >> Transmission and Drivetrain >> Transfer Case >> Control Module >> Service and Repair >> Transfer Control Unit
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transfer Control Unit

TRANSFER CONTROL UNIT

Removal and Installation

REMOVAL
1. Set transfer state as 2WD when 4WD shift switch is at 2WD, or as AUTO when 4WD shift switch is at AUTO.

CAUTION: When removing transfer control unit, transfer state must be at 2WD or AUTO.

2. Turn the ignition switch OFF and disconnect negative battery terminal.
3. Remove the glove box assembly. Refer to "LOWER INSTRUMENT PANEL RH AND GLOVE BOX"





4. Disconnect the two transfer control unit connectors.
5. Remove the transfer control unit bolts.
6. Remove the transfer control unit.

INSTALLATION
Installation is in the reverse order of removal.
^ When installing the transfer control unit, tighten bolts to the specified torque.
Transfer control unit bolts : 5.1 Nm (0.52 kg-m, 45 inch lbs.)

CAUTION: Do not connect harness connector to transfer control unit when 4WD shift switch is at 4LO.

^ After the installation, check perform self-diagnosis. Refer to "Self-diagnostic Procedure". If NG, adjust position between transfer assembly and transfer control unit. Refer to "Precautions for Transfer Assembly and Transfer Control Unit Replacement".
pro multis · About Operation CHARM