Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2005 >> Frontier 2WD L4-2.5L (QR25DE) >> Repair and Diagnosis >> Transmission and Drivetrain >> Differential Assembly >> Testing and Inspection >> Scan Tool Testing and Procedures >> Scan Tool Connecting
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Scan Tool Connecting

CONSULT-II Function (BCM)
FUNCTION





CONSULT-II can display each diagnostic item using the diagnostic test modes shown following.

CONSULT-II SETTING PROCEDURE

CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carries out CAN communication.

^ For details, refer to the separate "CONSULT-II Operations Manual".





1. Turn ignition switch OFF.
2. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector on vehicle.
3. Turn ignition switch ON.





4. Touch "START (NISSAN BASED VHCL)".





5. Touch "DIFF LOCK".
If "DIFF LOCK" is not indicated, go to GI-38, "CONSULT-II Data Link Connector (DLC) Circuit". CONSULT-II Checking System
6. Perform each diagnostic test mode according to each service procedure.

pro multis · About Operation CHARM