Except For California

TERMINAL LAYOUT

Terminals And Reference Values (Part 1):

Terminals And Reference Values (Part 2):

Terminals And Reference Values (Part 3):

Terminals And Reference Values (Part 4):

Terminals And Reference Values (Part 5):

Terminals And Reference Values (Part 6):

Terminals And Reference Values (Part 7):

PHYSICAL VALUES

NOTE:
- ECM is located behind the passenger side instrument lower panel. For this inspection, remove passenger side instrument lower panel.
- Specification data are reference values and are measured between each terminal and ground.
- Pulse signal is measured by CONSULT-III.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECMs transistor. Use a ground other than ECM terminals, such as the ground.