Operation CHARM: Car repair manuals for everyone.
Home >> Nissan-Datsun >> 2007 >> Frontier 2WD L4-2.5L (QR25DE) >> Repair and Diagnosis >> Body and Frame >> Body Control Systems >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Body Control Systems: Service and Repair

BCM (BODY CONTROL MODULE)

Removal and Installation

REMOVAL

NOTE: If possible, before removing BCM, retrieve current BCM configuration to use for reference when configuring brand-new BCM after installation. Refer to BCS-18, "Configuration". Testing and Inspection

1. Disconnect negative battery cable.
2. Remove lower instrument panel LH.
3. Remove knee protector brace. Refer to "INSTRUMENT PANEL ASSEMBLY".




4. Remove screws and release BCM.
5. Disconnect connectors and then remove BCM.

INSTALLATION
Installation is in the reverse order of removal.

NOTE:
- When replacing BCM, perform configuration. Refer to BCS-18, "Configuration". Testing and Inspection
- When replacing BCM, perform initialization of NATS system and registration of all NATS ignition key IDs. Refer to BL-119, "NVIS(NISSAN Vehicle Immobilizer System-NATS)". Vehicle Immobilizer System
- When replacing BCM, perform ID registration procedure of low tire pressure warning system. Refer to WT-12, "ID Registration Procedure". ID Registration Procedure
- When replacing BCM, register the remote keyless entry system keyfob ID codes. Refer to "ID Code Entry Procedure".
- When replacing BCM, preform adjustment procedure for the steering angle sensor. Refer to BRC-145, "Adjustment of Steering Angle Sensor Neutral Position". Testing and Inspection
pro multis · About Operation CHARM