Front

FRONT DOOR GLASS AND REGULATOR

Front Door Glass

REMOVAL
1. Remove the front door finisher. Refer to "FRONT DOOR"
2. If equipped, temporarily reconnect the power window switch.




3. For power windows, operate the power window switch to raise/ lower the door window until the glass bolts can be seen.
4. For manual windows, temporarily reinstall the window crank handle and lower the window until the glass bolts can be seen.
5. Remove the inside seal.
6. Remove the glass bolts.




7. While holding the door window, raise it at the rear and pull the glass out of the sash toward the outside of the door.

INSTALLATION
Installation is in the reverse order of removal.

Glass bolts : 6.1 N.m (0.62 kg-m, 54 in-lb)

- Check the glass for proper fit. Refer to GW-56, "FITTING INSPECTION". Front
- On the drivers door, reset the motor. Refer to "SETTING AFTER INSTALLATION".